top of page
Metal head 80W~150W CO2 Laser Tube  for Laser Engraving Cutting Machine
  • Metal head 80W~150W CO2 Laser Tube for Laser Engraving Cutting Machine

    • 【SPECIAL COATING TECHNOLOGY】: This CO2 laser tube adopt inner discharge tube coated with nanogold catalyst technology, power is 10% improved, and service life is 20% longer than ordinary laser tube,better chooice for the people who has heavy workload and long working hours
    • 【APPLICATION】: This co2 laser tube compatible with all the co2 laser engraving and cutting machine that used laser tube as power,but please make sure your machine's installation space,like the diameter and length,all should be a little bigger than laser tube's size
    • 【METAL HEAD】: With metal head,it is not easy to crack like the glass head style and the screw connection lead is convenient to connect the wire when installation
    • 【DURABLE】: Made by glass which contains 80% quartz , the tube is solid and durable,the service life can reach 3500H-4500H under normal use
    • 【STABLE OUTPUT】: With excellent sealed-off technology to divide air and prevent inside gas diffusion, the laser tube has very stable output power and good spot mode.About the installation of laser tube,here is a video for your reference : https://youtu.be/mbwYveQZPZ8.
    • 1. Keep the cooling water sufficient and usually, the water temperature is controlled below 30 degrees Celsius, and the temperature difference with the room does not exceed 5 degrees Celsius, to prevent the laser tube body or window mirror from condensation due to excessive water temperature difference. If the phenomenon of condensation occurs, the condensation part can be wiped clean (wipe clean before the power must be turned off), and then adjust the cooling water temperature to the appropriate temperature, and then restart the work.
      The laser inlet and outlet water should be low into the high principle, the laser inlet and outlet water pipe should be far away from the laser tube body (especially the light outlet tube body), the tube body outlet vertical up, no bubbles in the tube. (Laser tube into the water outlet can not be tilted, due to installation problems lead to fried tube, our company does not carry out warranty.)
      2. Keep the window mirror lens clean and free of pollution. Regularly or irregularly with bamboo swabs with anhydrous ethanol (alcohol) on the laser window mirror pollutants to clean. (Pay attention to the strength when cleaning the window mirror to avoid the lens being scrubbed)
      3. Pay attention to keep the high voltage end clean and dry, regularly clean the dust around the high voltage electrode, or isolate the electrode with plastic film to avoid the high voltage end from firing.

    700,00$Prix
    bottom of page