TEN-HIGH CO2 Glass Laser Tube Dia for Laser Engraving and Cutting Machine
  • TEN-HIGH CO2 Glass Laser Tube Dia for Laser Engraving and Cutting Machine

    • 【EASY INSTALLATION】: The wire on positive pole and negative pole had been pre-installed,just connect to the wire on the machine and cover with insulating tape will be ok
    • 【APPLICATION】: This co2 laser tube used for beauty equipment ,but please make sure your machine's installation space,like the diameter and length,all should be a little bigger than laser tube's size
    • 【STRONG HEAT RESISTANCE】:The tube body is made of glass containing high borosilicate, the tube body is hard, not easy to deform, heat resistance is strong, and it is not easy to crack at high temperature,the service life can reach 1500H-2500H under normal use
    • 【STABLE OUTPUT】: Single mode output mode, fine spot, strong penetrating power, no change in long-term use spot mode
    • 【UNIQUE TECHNOLOGY】: With excellent sealed-off technology to divide air and prevent inside gas diffusion,the laser tube will be more stable and efficient.About the installation of laser tube,here is a video for your reference : https://youtu.be/mbwYveQZPZ8.
    • DETAIL

      Power: 40W (actual power 33W -37W, peak power is 45W)
      Length: 700mm( error is ±10mm)
      Tube Diameter: 50mm; Beam diameter: around 3mm
      Wavelength: 10600nm
      Input voltage: AC 200V-240V
      Working Voltage: 16KV (Trigging Voltage=22KV)
      Maximum output voltage: DC25KV
      Maximum Working Current: 15mA (normally controlled at 10mA-12mA)
      Maximum output current: DC20mA
      Service life: 1500H-2500H(under normal use)

    • Amazon